[SOLVED] BRICKED x96mini (Amlogic S905W) - red LED no display

  • Date: 01 Dec 2022
  • Publisher: gsmserverpro

[SOLVED] BRICKED x96mini (Amlogic S905W) - red LED no display



The advise in that blog post allowed me to find the correct pin for my board using a multimeter and some time&luck?:cool:

I then describe the procedure that revived my box:

1.- watch image and mimic wire solder (marked with a red circle and GND label)
2.- short marked resistor using the grounded wire and plug power. Hold the wire for 2-3s and disconnect wire from resistor. Unplug power.
3.- connect usb to pc and otg connector on board. When pc recognizes it, plug power. (if you don't plug in the power, the board has not enough?minerals?energy and the flashing fails.
4.- use flashing utility to reflash your device (not explaining that here; lots of advise on other threads).



Also, if someone needs the stock Android 9 firmware, here it is:
https://mega.nz/#!UcQ12KpL!NPjAQlFLUHwVxf7y_Lw9V4vZAaCYeuD6f1RpqwgmCH8

I hope this helps?:D